jediknight0 Wrote:So I've never done a custom figure (or anything like that) before, but looking at the lightcycles it seems odd that we had Sam, Kevin, and CLU... but no Rinzler? So... Comments?

Nice job. The orange matches very nicely to Rinzler. Did you paint over the clear parts with transluscent paint? I've torn apart a Clu bike and am going to try recasting those pieces in either clear or dyed resin. Ditto for the light jet as well and swapping out the LEDs.abortion pills online http://www.kvicksundscupen.se/template/default.aspx?abortion-questions cytotec abortion

Here's my Rinzler bike, based on the Clu bike.


I'm not sure Rinzler's bike had the little winglets over the rear wheel, but I'm going to wait until I can check it out better on the BluRay before cutting them off...

DevRevenge Wrote:Looks great trench! I'm excited to figure out if Rinzler was on a G4 or G5 bike too. The orange looks good too, how does it look when it's lit up? Can you share how you got the plastic dyed like that?

It was actually pretty easy, I just went over everything that was yellow with Tamiya clear red.

Originally that was my plan just for the translucent bits, and going with a solid reddish orange color for the rest. Then after spending a half-hour failing to mix a suitably matching color to the Rinzler figure, I discovered that simply using a light coat of the clear red over the yellow paint on the body panels worked pretty nicely.

The final color ends up being a touch darker than Rinzler's red-orange, so if I were to do it again, I'd maybe consider using a mix of clear red:clear orange or clear yellow.

I was hoping it would light up more orange, but unfortunately the yellow LEDs cut through the red paint surprisingly well, plus, there was quite a bit of yellow light leaking around the translucent plastic bits on the wheels, so the overall effect is a slightly orange tinted yellow. Therefore, a proper job would require changing out the LEDs. However, since the bike will spend 99.99% of the time unlit, I was OK with the final result.

trench Wrote: DevRevenge Wrote:Looks great trench! I'm excited to figure out if Rinzler was on a G4 or G5 bike too. The orange looks good too, how does it look when it's lit up? Can you share how you got the plastic dyed like that? It was actually pretty easy, I just went over everything that was yellow with Tamiya clear red. Originally that was my plan just for the translucent bits, and going with a solid reddish orange color for the rest. Then after spending a half-hour failing to mix a suitably matching color to the Rinzler figure, I discovered that simply using a light coat of the clear red over the yellow paint on the body panels worked pretty nicely. The final color ends up being a touch darker than Rinzler's red-orange, so if I were to do it again, I'd maybe consider using a mix of clear red:clear orange or clear yellow. I was hoping it would light up more orange, but unfortunately the yellow LEDs cut through the red paint surprisingly well, plus, there was quite a bit of yellow light leaking around the translucent plastic bits on the wheels, so the overall effect is a slightly orange tinted yellow. Therefore, a proper job would require changing out the LEDs. However, since the bike will spend 99.99% of the time unlit, I was OK with the final result.

You can swap LED's with the one-man light jet. Will require some soldering but that's what I'm doing and giving the jet the yellow ones from Clu's bike to make Clu's jet.abortion pills online abortion questions cytotec abortion

Not as hard as removing the clear rim pieces (broke two of the four) but I'm going to get some Alumalite and make castings of the good pieces. Problem with the light jet is the exhaust and arm consoles need to be completely recasted in either clear or transcluscent yellow so most of the work and expense will be recasting pieces.

basic knock-together of my Norton Antivirus custom. Arms/Legs = Marvel Universe Multiple Man, Hands = Marvel Universe Winter Soldier, head = GI Joe Rise of Cobra Snake Eyes...

The main body will be sanded down a bit around the chest and re-painted/sculpted so that the only light-up point will be the Norton 'o' symbol.order abortion pill abortion pill buy online where to buy abortion pill

Eh... maybe. The visor is the wrong shape and the chin is way too pointy.

CorrupTron Wrote:Haha that Snake-Eyes head would make a good Daft Punk custom.

It' could be a Thomas Bangalter custom.

http://www.bigbadtoystore.com/bbts/product.aspx?product=MED10503&mode=retail&picture=outorder abortion pill abortion pill buy online where to buy abortion pill

Boba Fettuccini Wrote:Like I said, all the shapes are wrong. It would require a loooot of re-sculpting.

Your words = pain to my heart.


order abortion pill abortion pill buy online where to buy abortion pill

Grab some Milliput and you're good to G-O.where to buy abortion pill http://blog.bitimpulse.com/template/default.aspx?abortion-types buy abortion pill online