As for a suggestion to make that box look like Tron, I suggest getting a acrylic case.. and what I would do, is take it completely apart, remake the top front and side with crystal clear epoxy, make a mess, if you paint the UV additive mixed w/epoxy onto a piece of glass and adhere a piece of wax paper to it, or something similar, then set those onto the pieces that are curing, it will glow when a red or black uv light hits it. Then you could get some glow tape and in some areas paint it black, but just leave the exposed glow lines where you want more circuits. you could laminate those layers on the inside of the case, and make the UV spectrum glow outside. It's not cheap, but it is easy enough to duplicate any electronic imagery and embed it. you can add glowing feet on it, heat sensitive luminated plastics in various locations. it could look crazy.
(wear gloves for the epoxy parts lol). That's of course a dream case... but it's very doable. and not too expensive.
edit: or instead of adding the UV additives in clear epoxy over top of a panel in the making, mold the panel onto the additive expoxy, to ensure a really flat glossy surface, then over pour and add another flat piece w/ wax paper on it to the top. you have to think creatively to take the custom route..
redirect open why married men cheat on their wives